SEAM in Tagalog translation

• seam
• pinagtahian
• tahi

Examples of using Seam in English and their translations into Tagalog

A6, the close forward checks into the seam area.
A6, ang malapit na inaabangan ang panahon sumusuri sa seam area.

Pin and stitch the side seam allowances.
Pin at tahiin ang mga gilid pinagtahian allowance.

finish the side seam allowances.
tapusin ang side tahi sustento.

the close forward checks into the seam area.
ang mga check ng malapit na pasulong sa seam area.

Stitch a 1.5cm seam allowance.
Tahiin ng 1. 5cm pinagtahian allowance.

Trim the seam allowance then overlock or zig-zag the seam.
Trim ang pinagtahian allowance pagkatapos ay overlock o zig-zag tahi.

Construction pile cage welding machine seam welder with ISO.
Konstruksiyon pile cage welding machine pinagtahian manghihinang sa ISO.

Apply the zip tape to the seam allowances.
Ilapat ang zip tape sa seam allowances.

create side seam.
lumikha ng side seam.

Our welding system is unity of longitudinal& circular seam welding.
Aming welding system ay pagkakaisa ng paayon& pabilog pinagtahian hinang.

Edge-beam automatic welding system is widely used in longitudinal seam and circular seam welding.
Edge-beam awtomatikong hinang sistema ay malawakang ginagamit sa paayon pinagtahian at pabilog pinagtahian hinang.

create side seam.
lumikha ng side seam.

Our welding machine can realize longitudinal seam welding separately.
Our welding machine ay maaaring mapagtanto paayon pinagtahian hinang hiwalay.

Pin and stitch the center back seam allowance.
Pin at manahi sa sentro likod pinagtahian allowance.

To do this, cut around your seam at a distance of about 1cm.
Upang gawin ito, gupitin ang paligid ng iyong tahi sa layo na mga 1cm.

Step 4: The seam of the cone is now completely coated with glue.
Hakbang 4: Ang tahi ng kono ay ganap na pinahiran ng kola.

Finish the seam allowance.
Tapusin ang pinagtahian allowance.

Take the cuffing pieces and stitch together the seam allowances to create tubes.
Dumaan sa cuffing piraso at tusok-sama ang pinagtahian allowance upang lumikha ng tubo.

Finish the seam allowance up until the Zip End marker.
Tapusin ang pinagtahian allowance hanggang sa Zip End marker.

Finally, each seam should be locked to prevent loosening of the seam..
Sa wakas, ang bawat seam ay dapat na naka-lock upang maiwasan ang pag-loosening ng seam..