Voorbeelden van het gebruik van Internal surface in het Engels en hun vertalingen in het Nederlands
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Computer
-
Ecclesiastic
-
Official/political
-
Programming
when it is assembled in matrix thread, its internal surface will form the standard thread.
Internal Surface 595 m² Bathrooms 7 Bedrooms 7 Presented by Atlanterra Inmobiliaria S.A.
Activated carbon is a very porous form of carbon with an enormous internal surface.
The external surface is formed with external threads, and the internal surface is formed with internal threads.
the"capture" the top 10-15 centimeters of the internal surface.
The villa has an internal surface of 750 m2 and is spread over three levels.
An internal surface gazohoda, should be not less 380MM if designs are not protected from ignition,
without ledges, an internal surface.
Outer surface and internal surface smooth, easy to scrape off,
The internal surface is polished to a smooth satin finish
or to cover their internal surface with a powder dusting.
TEKNOPOX REPAIR 3296 enables you to repair professionally damages on the internal surface, according to the instructions.
The ground floor has the internal surface of 93m2 and it consists of an open
At hydropneumatic washing it is useful to blow at first pipelines the compressed air for vzryhlenija deposits on an internal surface of pipes, and then to wash out their mix of water and air.
The apartment for sale Ciovo has internal surface of 87m2 comprising three bedrooms,
Them have so that between a beam and an internal surface of the channel there was a distance not less than 250 mm for flues from usual furnaces and 380 mm from furnaces with a long fire chamber.
promote rise in temperature of an internal surface in the bottom part of an external wall
Thanks to radiant heat exchange the temperature of an internal surface of protections in comparison with temperature raises at konvektivnom heating,
only the provided administration sets should be used because treatment failure can occur as a consequence of factor IX adsorption to the internal surface of some injection equipment.
should be replaced by"the internal surface.