Примери за използване на State of charge на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Faster charging: Less than five minutes required to reach an 80 percent state of charge(SOC), without compromising specific discharge capacity.
The charging time for 5% to 80% SoC(state of charge) is 22.5 minutes for charging under ideal conditions,
The proprietary new battery chemistry enables fast charging- less than five minutes required to reach an 80 percent state of charge(SOC), without compromising specific discharge capacity.
driving range and state of charge.
It charges faster, with,“Less than five minutes required to reach an 80 percent state of charge(SOC), without compromising specific discharge capacity.”.
position, state of charge of the power supply are often transmitted.
Using the analogy of a fuel tank in a car, State of Charge(SOC) estimation is often called the"Gas Gauge" or"Fuel Gauge" function.
Determining the State of Charge(SOC) of the battery is the second major function of the BMS.
calendar age, state of charge, current, temperature
temperature, state of charge, current, and depth of discharge,
Latest charging technologies combined with a Steca AtonIC-II algorithm calculates the state of charge of the battery, provides full battery maintenance
from 0 to 100% SoC(State of charge), the SBP battery is charged for 30 min,
The voltmeter reading may tell us something about the state of charge(with an enormous margin of error),
temperature, state of charge, current, and depth of discharge,
In the front, the capacity reserved by me is not equal to the state of charge, and the capacity of the retained capacity is equal to the product of the state of charge and the rate of change of internal resistance.
error display, as well as real-time information on the display concerning SOC(state of charge) as a percentage.
the purpose of battery detection is to determine the health status(SOH) and state of charge(SOC) of the battery.
the increase of internal resistance caused by the state of charge of the battery, the evaluation is meaningless.
The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached,
The company's battery state tester The initial internal resistance value will be corrected according to the service life of the battery, the state of charge and the temperature during the test, and then can be used for comparison.