英語 での Point designation の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
However, a device connection point with this connection point designation does not exist in the schematic.
A connection point designation with a leading question mark never overwrites a connection point designation without a question mark.
At least the DT must be entered; the connection point designation and description can be assigned automatically even after optimizing the distributed terminals.
In the Connection point designations tab you can specify 10 different connection point designation recommendations for each connection point. .
From the drop-down list on the left select one or more of the property sets Connection point designation and Connection point description.
For example, you enter -H4 here, the program interprets this entry as a device tag without connection point designation.
Each connectable object's pins have a so-called"full pin name", and"connection point designation.
Enter a connection point designation in the Connection point designation field of the new connection point. .
The displayed DT and the connection point designation of the part placement are output in the placeholder<x.
Select an entry from the drop-down list or manually enter your own connection point designation.
This means that if a device includes several functions, these functions can have the same connection point designation.
Saddle jumper connection points and connection points for internal jumpers do not require a connection point designation.
Cause The same connection point designation was assigned to several distributed terminals in the project.
This data is stored in the individual function definitions The connection point designation identifies the connection point. .
The identifying characteristic of a connection within a bundle is the bundle connection point designation.
Leave the suggested device tag M1 and the connection point designation of the motor as they are.
Cause A distributed terminal connection that is not a saddle jumper connection point and is connected to a function has no connection point designation.
In the properties dialog in the Connection point designation field, the current connection point designations are always listed as the first entries, after which the possible connection point designations of the following components are listed.
It has a DT and a connection point designation, a connection point description, and all other properties that all(normal) functions have.
The most important properties are entered in the fields in the upper part of the tab, e.g. the displayed or the full DT, the connection point designation, the functions text, etc.