英語 での Pulling force の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
For aerial power transmission application, able to bear moderate pulling force.
WJ01 and WJ02 is the same as both pushing and pulling force.
With closed hydraulic circuit and variable displacement plunger pump, the pulling force could be step less controlled.
Accessory Winch has the capacity of 20 tons pulling force, which can be used for self-help and dragging.
The recommend F is 1O tones, the pulling force for the pulley block is 5 tonnes.
While tension load cells measure the pulling force, compression load cells measure a pushing force along a single axis.
Power plant: Brushless DC motor made with imported technology, with advantages of long service life, large pulling force and low noise.
The pulling force has been increased by +50% compared to previous generation.
It is a pen- stand that fixes a metal pen that focuses on the"pulling force" of magnetic force. .
The max pulling force for stringing operation can be preset.
Tons pulling force, which can be used for self-help and dragging heavy goods.
With 5-12 tons of pulling force, it effectively prevents heavy cargo from movement or damage during transport.
The high pulling force above 1000N allows compatibility with high seal reactions.
If the pulling force becomes large, deformation due to the pushing force will be small.
New research shows that the pulling force of a frog's tongue can be up to three times the animal's own weight.
After pulling force, will shape deformation, please note that when used.
Strong adhesive and tensile strength, strong pulling force excellent holding power.
When the machine is embroidered, the polyester thread can withstand the higher pulling force of the embroidery machine, which can make the machine run faster;
Rally axial movement of the mandrel is working faster than the speed of the axial movement of the tube mandrel, mandrel pulling force on the inner surface of the tube.
The pulling force of a KALLER special cylinder allows changing of tooling adaptors within 1 second, and its perfectly balanced cylindrical design allows rotational speeds of up to 60,000 rpm.