英語 での The bend の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
As a result the neutral surface lies at a distance kT from the internal surface of the bend.
These test standards specify the specimens required for the bend test, as well as the necessary equipment and procedures for performing the test.
This puts stress on the bend point in Australia, which also begins to bend. .
It is with standard 19 inch size and properly designed to control the bend radius of the cable inside the enclosure.
Once the bend table is found in the. csv, it will be used to unfold the sheet metal part.
The bend should avoid the place near the joint, otherwise, it may aggravate fatigue of hose and thus lead to earlier aging.
The bend condition of a way and the feeling of the wooden wall show exquisite harmony.
Now additional signs of stress at the bend point in S America have appeared in Villa Rivero.
The bend angles of a riser bar are identified as SWEEP(or back-sweep) and TIP(or up-sweep).
Please notice that writing rights to this folder might be limited. In such case you need to copy the bend tables to a different folder in which you have full access rights.
There is no predictor indicating that the bend and drop are about to happen that we could point to.
There is no predictor indicating that the bend and drop are about to happen that we could point to.
However, if the selected distance is too large, the flexibility of the bend will decrease.
Specified, hooked edges for heavy and medium type screen cloths are approximately 32mm long from the inside of the bend to the. .
This alley has been extended, at the end of the bend, more fun.
Recently, Portuguese scientists conducted a study and found that the most attractive for men is the bend of the female back.
Putting the two halves together, we again combine the corners and cut off in the middle of the bend.
Separated from the brake shoe, the support must be able to withstand the bend test with cracking or breaking.
In northern Viet Nam, Yen Bai at latitude 21° frankly cracked off at the bend line.