Examples of using The torque in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
The torque generated during rotation is determined by the oil viscosity, the pressure area of the blade and the clearance between the blade and the body.
The torque transmission shaft with cubes of bearings has been increased to improve reliability in situations of high demand, especially in driving circuit.
The torque converter automatically adjusts the torque and transmission speeds with a stable start, average and fast acceleration, in realizing a constant transmission in a wide range.
The torque for opening and closing is small,
The torque chart indicates the direction, order and torque(strength and angle) that requires the
When drilling, slightly tighten the chuck, strengthen the grip force and increase the torque, obviously increase the grip force
In this case it is possible to measure either the torque on the magnet system or the angular velocity at which the wheel spins.
Improving the torque of the transmission and truck unit power; the chassis adopt BENZ technique, strong climbing, safe driving, etc.
It is required to replenish the inside of the torque converter in time
The torque rheometer can measure the rheological properties of materials continuously, accurately and reliably.
The torque converter and gear box are positioned separately which is convenient for maintenance.
After the speed controller is connected to the motor, if the torque or speed doesn't meet the requirement, please adjust trimmer potentiometer on the side of US-52.
if the rolling bearing is fitted, it is effective to reduce the torque of globe valve for easy operation.
Locating the torque cylinders on the fixed end of the bed allows for simple, trouble-free service.
Otherwise, when the torque produced by the motor overcomes the load torque, the rotation acceleration will be generated, and the rotation speed will continuously increased to the highest speed.
Located on the transmission cover, they pull oil at low pressure from the sump at the bottom of the transmission and feed it at high pressure to the hydraulic system, the gearbox cooler, and the torque converter.
The Torque Vectoring.
Then comes the torque.