WELDS in Chinese translation

• 焊接
• 焊缝

Examples of using Welds in English and their translations into Chinese

For example, an engine heat exchanger has 2 000 individual sub-components, joints or welds.
例如，发动机热交换器具有2000个单独的子部件，接头或焊接。

To turn a welding torch into a 3D printer the robot welds continuously over the same area, building up layer after layer of metal.
要将焊枪变成3d打印机，机器人需要在同一区域连续焊接，形成一层又一层的金属。

These improvements come from laser cutting and forming rigs that remove about 40% of the welds, dramatically changing the design/build process.
这些改进都来自激光切割和成型的钻机除去约40％的焊接，大大改变了设计/建造过程。

In order to protect components, welds must be performed at the lowest possible heat and with the smallest possible electrical charge.
为了保护部件，必须在尽可能低的热量和尽可能小的电荷下进行焊接。

During his experiments, Soloff discovered that sound waves were not limited like other plastic welds.
在他的实验中，Soloff发现声波不像其他塑料焊接那样受限。

In recent weeks, company executives concluded they could produce Model 3 underbodies with fewer spot welds than they had been using.
最近几周，公司高管得出结论，他们可以用更少的焊接点生产Model3车辆底盘。

The team tested the welds at -50° to 90°C and they remained intact, showing that they are robust enough to withstand extreme conditions.
该团队在-50°至90°C的温度下对焊缝进行了测试，结果表明它们足够坚固，能够承受极端条件。

As its welds were very weak too, they could crack even under fire of light weapons.
而且由于它的焊缝很脆弱，即使在轻武器的火力下也有可能发生断裂。

It is used extensively in the automotive industry- ordinary cars can have several thousand spot welds made by industrial robots.
它广泛应用于汽车制造业，一辆普通汽车上由工业机器人进行的焊接点多达几千处。

A major advantage is that the process may be used underwater and can be used to scan welds through paint and other coatings.
主要的优点是该方法可以在水下使用，并且可以用于通过油漆和其它涂层扫描焊缝。

(1) Laser and arc composite heating welding Laser welding can weld narrow and deep welds, and arc welding can weld wide and shallow welds;.
(1)激光和电弧复合加热焊接激光焊接可焊出窄而深的焊缝，电弧焊接可焊出宽而浅的焊缝；.

Rather than give up on it, McDowell suggested doing three separate welds.
麦克道维尔没有放弃，而是建议先做三个单独的焊接体。

The FSW model geometry is made up of two aluminum plates and the tool that welds them together.
FSW模型几何结构由两块铝板和将它们焊接在一起的工具组成。

In addition, welds shall be inspected by radiographic, ultrasonic or another suitable non-destructive test method on a sample of closed cryogenic receptacles according to the applicable design and construction standard.
此外，还应根据适用的设计和制造标准，对封闭式低温贮器样品的焊接作放射线照像、超声波或其他适当的非破坏性试验方法的检查。

When a man is hit by lightning,” Tyler says,“his head burns down to a smoldering baseball and his zipper welds itself shut.”.
当一个男人被闪电击中,”泰勒说,”他的头会被闷烧成一个小棒球和他身上的拉链都会被焊接起来。

Hence, overall, welds in many of the 300 series austenitic stainless steels, made with no filler or approximately matching filler will typically show mildly magnetic properties.
因此，总体而言，在不含填料或大致匹配填料的300系列奥氏体不锈钢中的许多焊缝通常显示轻微的磁性。

Ultrasonic is limited to smaller welds.
超声波焊接仅限于较小的焊接。

Minimize the use of welds and adhesives.
尽量减少焊接和胶粘.

FAQ: Why are my 300 series austenitic stainless steel welds magnetic?
下一篇：为什么300系列奥氏体不锈钢焊接后具有磁性？?

But he welds great dominion, nonetheless,' said Gimli;
但他拥有伟大的统治,尽管如此,吉姆利说;