Examples of using Ohms in English and their translations into Croatian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
CTs have a constant output power at 4 ohms- 8 ohm load almost unanimously to make the system more flat frequency response,
calibrated from infinity to 0 ohms.
impedance 2×4 ohms, frequency response 19- 250 Hz, sound pressure level 93 d B and a weight of 26 Kg.
With an RMS power output of 130mW and an impedance of 30 ohms, the Turret headphone amplifier will drive virtually any headphone to extremely loud levels,
to achieve the ultimate with the main feeder impedance 50 ohms coaxial cable.
CTs have a constant output power at 4 ohms- 8 ohm load almost unanimously to make the system more flat frequency response,
an impedance of 250 ohms, sensitivity 96 db
an impedance of 600 ohms, sensitivity 96 db
calibrated from infinity to 0 ohms.
the load is therefore 4 ohms.
The constant output power of the CTs is almost the same under the load of 4 ohms to 8 ohms,
The constant output power of the CTs is almost the same under the load of 4 ohms to 8 ohms,
The constant output power of the CTs is almost the same under the load of 4 ohms to 8 ohms,
According to regulatory requirements rg value variesranging from 4 ohms to 10 ohms(to the value of the lower limit does not impose specific requirements, the upper- the maximum permissible option),
I is the current measured in amps and R is the resistance measured in ohms.
From 1900 the mercury ohm was replaced with a precision machined plate ofmanganin.
Ohm version can handle levels up to +20 dBu.
Output impedance 200 ohm balanced.
It has selectable impedance 16/8 Ohm, effects loop reinforced tubes
connector impedances must be 50 ohm.
