Examples of using Ohms in English and their translations into Spanish
{-}
-
Colloquial
-
Official
the minimum impedance for connected speakers is 4 ohms.
We do not recommend using bridge mode with loads lower than 4 ohms.
the minimum speaker impedence is 8 ohms.
75 ohms terminated.
Power is supplied via a single coaxial cable drop 50 ohms.
The remote control potentiometer can be from 4K7 ohms to 20K ohms.
Try out the inverse calculation milliohms to ohms.
For example, 8 Ohms nominal impedance for a 5 Ohms minimum.
The transfer function, Z(s), will thus have units of impedance- ohms.
loopthrough 75 ohms terminated automatically.
You can also connect two speakers with impedances between 8 and 16 ohms to both jacks a and B of the left and right Speaker Outputs.
Temporarily solder two resistors of 68,000 ohms in places of R6 in each channel.
to each channel's output, speakers with impedances between 4 and 8 ohms should be used.
The DMX cables in this category have a resistance of 110 ohms, which is vital to reducing the chance of interference.
But you could get a transformer that had just wound for 4 and 8 ohms.
You can measure the resistance of 1 ohms to 2 megohms,
The 8 or 4 Ohms commonly indicated in the technical characteristics of the acoustic loudspeakers are based on the N60065 norm,
If impedance measured at 1000Hz is 8 Ohms, the hi-fi loudspeaker will then be said to be 8 Ohms nominal impedance.
must maintain continuous contact with a maximum resistance of 5 ohms.
This exclusive feature lets you set the subwoofer's impedance to either 2 ohms or 4 ohms with the flip of a switch see illustrations to the right.