Examples of using Protective layer in English and their translations into Finnish
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
Insulating protective layer, thus preserving the copper wire, can also prevent the parts being welded to the wrong place.
And as I understand it, to keep the wormhole open, the suit generates a membrane, a protective layer that travels with her.
which has a beneficial protective layer on the stomach.
it is necessary to lay a protective layer on the surface of the waterproof coating,
Under the influence of weather conditions occurgradual thinning of the protective layer(of about 1.5 microns per year),
The suit generates a membrane, a protective layer that travels with her. And as I understand it,
The thus obtained slabs made of natural material and the protective layer prevents the biological effect(fungus,
When placing mineral wool insulation as necessarily necessary to provide a protective layer against moisture and steam, and an air gap.
in addition its surface is at the final stage is required to be coated with a protective layer.
has the disadvantage- low temperature in a room in the protective layer cracks.
It also provides a protective layer on the moving metal surfaces which resists break down, even under difficult conditions.
a transparent protective layer of the laminate is resistant to shock,
In addition, it forms a kind of protective layer, through which sensitive skin can be preserved from numerous environmental influences such as dry heating air, exhaust gases, cold and UV radiation.
Firstly, this drug if it enters the acidic environment of the stomach immediately forms on the surface of the mucous gel-like protective layer, which restores the barrier between the epithelial cells and gastric contents.
you can proceed to its toning and application of the protective layer.
In places where the floor is in contact with the wall, waterproofing is not interrupted- to a height of 30 cm from the floor necessarily applying a protective layer.
The technology breakthrough is that the Nanol additive forms a nano-thin copper protective layer on the metal surface.
Zinc surfaces that have already received a normal protective layer of corrosion products are seldom attacked.
forms a water-repellent protective layer on the cover.
DuraShield Boosters™ form a protective layer around the smaller soot particles, which stops them from forming larger abrasive particles.