Examples of using Axis of reference in English and their translations into French
{-}
-
Official
-
Colloquial
mounted on the vehicle; the axis of observation to be taken as the axis of reference in the tests(horizontal angle H 0,
mounted on the vehicle; the axis of observation to be taken as the axis of reference in the tests(horizontal angle H 0°,
it may be mounted on the vehicle; the axis of observation to be taken as the axis of reference in the tests(horizontal angle H 0°, vertical angle V 0°);
means the orthogonal projection of the lamp in a plane perpendicular to its axis of reference and in contact with the exterior light-emitting surface of the lamp, this projection being bounded by the edges of screens situated in this plane, each allowing only 98 per cent of the total luminous intensity of the light to persist in the direction of the axis of reference.
50 per cent of the minimum intensity in the axis of reference of the lamp shall be considered sufficient, provided that a note in
50 per cent of the minimum intensity in the axis of reference of the lamp shall be considered sufficient,
it may be mounted on the vehicle; the axis of observation to be taken as the axis of reference in the tests(horizontal angle H 0°, vertical angle V 0°);
the axis of observation to be taken is the axis of reference in the tests(horizontal angle H 0°,
means the orthogonal projection of the lamp in a plane perpendicular to its axis of reference and in contact with the exterior light-emitting surface of the lamp, this projection being bounded by the edges of screens situated in this plane, each allowing only 98 per cent of the total luminous intensity of the light to persist in the direction of the axis of reference.
3.5.11. to 3.5.13.) means the orthogonal projection of the lamp in a plane perpendicular to its axis of reference and in contact with the exterior lightemitting surface of the lamp, this projection being bounded by the edges of screens situated in this plane, each allowing only 98 per cent of the total luminous intensity of the light to persist in the direction of the axis of reference.
Axis of reference.
In the axis of reference.
Verification of all trunnions with the same axis of reference.
These segments are determined in relation to the axis of reference.
These segments are determined in relation to the axis of reference.
Measuring points expressed in degrees of angle with the axis of reference 2.1.1.
V 0° correspond to the axis of reference.
V 0° correspond to the axis of reference.
The intensity along the axis of reference shall be not less than 80 candelas.
Centre of reference" means the intersection of the axis of reference with the exterior lightemitting surface. 3.3.16.