Examples of using Function selector switch in English and their translations into French
{-}
-
Colloquial
-
Official
Turn the function selector switch 6 to position.
You can turn it back on by turning the function selector switch to OFF and back to a measuring function. .
The channel is the input selector switch for function block(FB) of the sensor.
keep the button RANGE pressed for approx. 2 seconds until“AUTO” reappears on the display or select another test function with the selector switch 10.
keep the button“RANGE” pressed for approx. 2 seconds until“AUTO” is displayed or select another measuring function with the selector switch 6.
When the LED indicator is green, the selector switch functions as a Mode Selector. .
Before changing functions using the selector switch, always disconnect the test leads from the circuit under test.
Each time the SET button is pressed, the selector function switches alternately as shown.
Do not operate the function selector switch while the motor is running.
The function selector switch is set to“Drilling without hammering”.
Turn the function selector switch(1) to the AUTO position.
Turn the AUX/RADIO function selector switch(8) to the.
Set the function selector switch 6 to the drill symbol.
Turn the function selector switch(8) to CD/MP3 or RADIO.
Rotate the function selector switch to position for the chiselling function. .
Speed-control switch Function selector switch Forward/ reverse switch. .
Unlocking button for function selector switch.
Turn function selector switch to V and the desired range.
Set the function selector switch to“Hammer drilling”.
Turn the function selector switch(6) to the CD/USB position.