Examples of using Function switch in English and their translations into French
{-}
-
Colloquial
-
Official
Set the Function Switch to the desired current range.
Move the function switch to AUX.
Turn the function switch to the convection position.
Function switch switch matrix switch switch and splitter.
Set the Function switch to RADIO mode.
Never pour water over the function switch area.
Set the function switch at the Hz position
Push the function switch(7) to the ON position
Set the function switch at/ position and push the/ button to select continuity or diode test mode.
Set the function switch, located at the top of the device on the right-hand side, to COLD.
Set the function switch to the diode/continuity position. The diode
Indication and adjustment is carried out in the front via a clear LC-display and a function switch as well as two keys.
Set the function switch, located at the top of the device on the right-hand side,
move the function switch(16) to the OFF position.
The function switch is connected directly to the DALI SQM(potential free contact)
Light dirty between the suction pipe, motor housing and exhaust opening by changing of the position of the Function switch several times.
When the Function Switch is moved to an unprogrammed channel,
push the function switch(7) to the OFF position
Slide the function switch(10) to the“DC2” position to switch to battery mode.
make sure that the terminator is off function switch F is set to“0”.