Examples of using Signal level in English and their translations into French
{-}
-
Colloquial
-
Official
During manual receive, the signal level indicator displays the signal level as shown below.
If you cannot achieve that signal level with your antenna or cable, your HDTV might lose picture or sound.
LFE ATT 10- the LFE channel signal level is reduced to avoid distortion.
From the signal level display menu, if you press the ENTER key,
Due to the signal level indicator you can be sure that you have outdistanced příliš.
Increasing the input signal level or turning up the Level controls will not increase the operating level beyond the limit indicated.
The signal level is adjusted with the PHONES/ CONTROL ROOM control
A signal level indicator(L1, L2,
If the signal level falls below a certain value for a few minutes,
In addition, the signal level of the compressor input
The VU meters(4) will then show the signal level of the channel selected with the PFL button 10.
The PROMAX-4 is an advanced model signal level meter designed for the installation and maintenance of television signal reception
The signal level at the output“Recorder out”(15)
Then the receiver display shows RF signal level value, the antenna status will display antenna A or B.
These indicators(14) monitorize the signal level present on each output bus,
Use this control to compensate for signal level loss due to compression
Professional Decibel Level Meter for displaying the signal level on an external display.
A signal level indicator(L1, L2,
This is the maximum frequency at which the encoder electronics can switch back and forth between the low and high signal level.
AUX 2: line signal level input via a 3.5 mm stereo jack- AUX 1: line signal level input via RCA jacks left L/right R.