Examples of using Sump in English and their translations into Hindi
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
The cam carriers, covers, oil sump, dry sump, and housings for the camshaft control are made of magnesium castings.
vertical sump pump, slurry pump,
This valve makes sure that the large volume of oil in the inner V does not flow back into the oil sump and run empty.
A good rule of thumb is to select a sump with a volume of at least 20% the total tank size in water volume.
SPR Pumps are vertical, Centrifugal Slurry Pumps submerged in sump to work.
This is a useful feature that does not increase the cost of the sump much more than if you were to buy this accessory at a later time.
In a lubricating system, a device that forces oil from the sump to the moving parts of an engine.
This worked nicely, but somehow the water level in the sump got raised a little.
Two spare filter socks for the Red Sea sump which is included in the package.
Since dehumidifiers must be emptied place them near the bulkhead doors, sump pump or sink.
Do not invest in lump sump at just one time
The lengthened shaft series of Mud Sump Slurry Pump could be applied to the condition of deep liquid level.
Dongfeng KC has an plate that protects the engine sump, hoses and cooler.
Air is separated from the slurry in a vortex created by the impeller rotation and the tangential inlet to the pump's conical sump.
This kind of Long Shaft Sump Slurry Pump has added guide bearing structure on the basis of standard pump,
Submersed in water and sitting on the bottom of the sump, the SP series Vertical Sump Pump is commonly used to convey high-viscosity slurries with highly abrasive, coarse particles.
SPR vertical sump pumps are a type of special vertical slurry pumps used for industrial sectors like mining mineral processing quarries
The safest way to determine the size of your sump is to measure the distance from the water level you wish to keep in the tank to the bottom of the weirs in the overflow.
SMSP65-QV sump slurry pump is ideally suited for continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits. It is a single-casing sump slurry pump with an outlet diameter of 2.6 inches.
lube oil system determined that a severe inclination of the ship, coupled with a relatively low volume of oil in the sump, would likely result in a loss of pump suction.