Examples of using Control commands in English and their translations into Italian
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Programming
-
Official/political
a secure communication protocol for control commands over the network.
The connection comprises transmission of video signal and control commands as well as power supply of camera.
Corresponding control commands can be used to turn off processing of the DTR line on the modem.
UTAS designs many of components used in aircraft flight systems. The actuation group designs systems that translate cockpit control commands into movement of all the leading and trailing edge control surfaces(flaps, slats).
audio, and control commands through a single CAT 5e
storage unit(ICS) that converts data from the sensors into control commands for the robot.
thus control commands can be sent to the connected device,
overvoltage limit and blocks control commands to the tap changer in the event of an error.
NLB remote control commands will not work correctly if they are sent from a computer that has IPSec configured
The compact CubeConnectTM Transceiver accepts lighting control commands(inputs) from DMX512, BlueTooth Limited Energy(BLE),
intelligible speech transmission and of sufficiently dynamic control commands.
Upward HDBaseTTM compatible Digital Link supports transmission of uncompressed Full HD video and control commands through a single CAT 5e
DIGITAL LINK supports transmission of uncompressed full HD video and control commands through a single CAT 5e
streamline access to critical data, enabling operators to monitor process conditions and send control commands to the field connected devices.
In order not to confuse the control parser with human text, there is a special command, thanks, that you might have noticed after the control commands.
transmitting data and control commands to and from central control location.
Servomotors execute all control commands: Two translate braking
field instrumentation. Status information and control commands are transmitted digitally between the master
there are quite a few models which only understand proprietary control commands for which no usable documentation is available and therefore either cannot
If you control, command yourself you have power.