Examples of using Angular velocity in English and their translations into Japanese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
The output files contain the data of the simulated motion of the subject system such as position, velocity, orientation, and angular velocity of each rigid body and joint reaction forces.
Next, note that the initial angular velocity of the node"Node_Block" is defined with the design variables Wx0, Wy0, and Wz0.
If the wing was vibrating with a almost constant angular velocity, I should have an equal probability of getting a picture with wings fully forward and fully backward.
These are collected when the acceleration changes are=<0.25 G or the yaw angular velocity changes by=<8.5 degrees/second.
During the crucible or the outer cylinder rotates at a constant rate, the torque developed by differential angular velocity between the crucible and the inner cylinder(or shaft) is measured.
MathWorks does not warrant, and disclaims all liability for, the accuracy, suitability, or fitness for purpose of the translation. This example shows how to control the rotor angular velocity in an interior permanent magnet synchronous machine(IPMSM) based automotive electrical-traction drive.
Characteristics This device can convert digital data outputted from the CSM-MG100 into analogue voltage output(3-axis acceleration/ 3-axis angular velocity/ posture/ azimuth/ speed) with its built-in capacitor, allowing it to continue operation even when power is cut off.
Note that we are not setting the linear_velocity or angular_velocity properties directly, but rather applying forces(thrust and torque) to the body and letting the physics engine calculate the resulting movement.
Examples of angular velocity in applications.
Wave periods are expressed as angular velocity.
Column 17-19: the relative angular velocity.
Degrees per second(Angular velocity), frequency.
Degrees per minute(Angular velocity), frequency.
An ideal angular velocity source provides the load.
Radian per day(Angular velocity), frequency.
Radian per minute(Angular velocity), frequency.
Degrees per day(Angular velocity), frequency.
The following sets the angular velocity of the joint.
Resistance to vibrations other than angular velocity 3-2.
Radian per hour(Angular velocity), frequency.