Examples of using Leds indicate in English and their translations into Spanish
{-}
-
Colloquial
-
Official
These LEDs indicate how much the battery has 3200mAh Power Bank Vinsic Tulip.
LEDs indicate low or full charge level.
Multiple flashing LEDs indicate multiple pairs and/or multiple faults.
Continuous lightning of these leds indicate that the signal is being massively compressed.
The LEDs indicate wireless microphone signal input.
LEDs indicate active or muted channel conditions.
Two LEDs indicate the charging cycle which is being executed
LEDs indicate the status of the outputs
Diagnostic function during operation and on-site LEDs indicate the operating condition of the DriveControl
Four LEDs indicate the charge state of the battery as well as any problems that occur with the battery
Diagnostics: LEDs indicate the operating condition of the DriveControl
The LEDs indicate the progress of charging by lighting up continuously or flashing.
The LEDs indicate 0 dB,
These LEDs indicate the routing of two effect engines for the current preset- series,
When the Access Point is connected to power, LEDs indicate activity as follows.
These three LEDs indicate the relationship of the input signal level to the threshold of compression.
SIGNAL LEDS: these LEDs indicate that a music signal is present at the inputs.
These LEDs indicate the percentage of the charge
it may take up to 10 minutes before the battery gains a basic charge and the LEDs indicate that it is charging.
These LEDs indicate the status of each of the seven channels of.
