英語 での Insulation layer の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
Insulation layer is added to the outer cylinder of the frame to reduce heat loss, save energy and protect environment.
Complete double layer fire proof sheet steel, 38mm insulation layer is put in between double layer wall space.
Surround solid refrigeration and refrigeration uniform speed, super thick insulation layer, fast freezing preservation, energy saving and more economical.
Using postheating for cables speeds up the process of vulcanization of the insulation layer.
Complete double layer fire proof sheet steel, 38mm insulation layer is between double layer wall space.
It is possible to manage solder cracking by our originally designed low-elasticity insulation layer.
The insulation layer of roof, suitable for reinforced concrete roof, parking roof, is the first choice material of insulation layer.
When installing the heat sink, please add insulation layer for 6pcs MOS.
Urban outdoor glove made of high-quality polyester fabric, internal insulation layer of Thinsulate and microfleece lining.
Tank applies integrated intelligent high-pressure foaming, making sure insulation layer is uniform and tight.
The voltage at that value reaches 20 times more than rated voltage, it is likely to damage the coil insulation layer.
Inner vessel and insulation layer(covered layer) of the Tank, those sections exposed to raw material are made of 1Cr18Ni9Ti stainless steel.
If we now push-pull this rafter so that it goes through the insulation layer of the wall, we see that this volume is not subtracted from the wall.
The product is a bimetallic, single-metal, non-metal composite sheet with polyurethane rigid foam as insulation layer, which is usually used in industrial plants, logistics storage, integrated house wall and roof enclosure system.
It is made up of insulation layer, adhesive and veneer coating layer, the insulation layer is EPS, Graphite EPS, PU or XPS.
Using“UPILEX-VT” in the insulation layer, and lamination with our unique method makes UPISEL-N a non-adhesive copper clad laminate excelling in peel strength, solder heat resistance, chemical resistance, and dimensional stability.
Located above of the equipment, surrounded sealed by high-temperature sealing strips, and the insulation layer is made of soft aluminum foil and glass wool.
Without stripped cable insulation layer, the cable can be cut without doing cable branch connector completely sealed waterproof insulation. .
The wall, then Pins into the insulation layer, self locking washer fixing the insulation layer, then bend the pins. i square meters.
The quality of the insulation layer varies depending on the speed and thickness of the laminar flow, making the laminar flow faster, making the laminar flow thicker, by doing it many times, you can maximize the insulation effect.