Examples of using Insulation layer in English and their translations into Croatian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
with high temperature insulation layer of flexible silicone heating device and with stainless steel jacket.
The insulation layer of mineral wool on Al-foil 80 mm thick effectively protects the boiler from heat losses.
you do not damage primary insulation layer of the cable.
and even the insulation layer breaks down, causing an accident.
cold autumn will be enough insulation layer thickness of 100-150 g/ square.
Laying acoustic insulation layer from the inside- a more sophisticated version in terms of installation,
If a mineral fiber plate is used as a heat insulator for a roof, the insulation layer must necessarily be covered with a light finishing material,
if the ground is solid impurities that can damage the hydro and thermal insulation layer is recommended for filling coarse sand.
A sheath wool insulation layer is laid along the walls, and a special layer is installed on the roof, allowing to filter the used water(for example,
state of the winding, which easily causes the insulation layer coke to fall off and short-circuit fault occurs,
The use of liquid plastic PVC windows also helps to improve noise insulation layer that will protect any room from outside noise outside,
the other side is formed into small bumps, and the insulation layer is also destroyed after the stacking.
core of metallic copper silk wrap the insulation layer that Fu contacts,
Even when the 3-cm layer of heat loss device DSA are reduced to 25 degrees, and if the insulation layer will be 7.8 centimeters,
otherwise in one season your thermal insulation layer will completely fail.
prevent water standing between the insulation layer and the membrane or concrete wall.
take a percentage of a deal(if pursue 5), scrape the insulation layer of enamel-insulated wire again on solder naked copper cash.
Under it can be located insulation and insulation layers(with additional installation of the crate).
Next is the thermal and sound insulation layers.
Next on the boards stacked insulation layers, ie, steam,