英語 での The inner wall の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
(4) Small fluid resistance: The inner wall of the pipe is smooth with a roughness coefficient of 0.0084.
A spatula was used to carefully scrape the inner wall, and observation with the S-4300SE/N revealed more than 2,000 particles.
(4) The fluid resistance is small: the inner wall of the FRP Pipe is smooth and the roughness coefficient is 0.0084.
When the inner wall of a blood vessel is damaged due to arterial sclerosis, platelets also agglutinate and form a blood clot inside the blood vessel.
Clean the inner wall of protection cap with clean paper, then evenly apply grease.
I stretched the ceiling and the inner wall to the garage to eliminate the exposure of the pillars and beams.
All the ice cream cups bottoms are ndented by spiral design and the inner wall coated with thick PE layers which prevent leakage effectively.
A portion of that energy is lost due to the friction between the fluid and the inner wall of the pipe.
Thereby, the stent ST and the inner wall of the blood vessel B become bonded solidly and quickly.
If you are worried about the NVR eavesdropper, you can hide the NVR in some hard to find locations, such as the attic, the ceiling, the inner wall, the closet, and even the crawl space.
As the surveillance specimens inside the reactors are placed closer to the reactor core than the inner wall of the RPV, it is possible to"foresee" the future to some degree.
Machine is provided with stirring device so that no active ingredients in the material cannot stick to the inner wall of hopper, which contains your material.
Such hydrophilic materials in most cases exhibit lubricity by wetting(water absorption) and reduce the frictional resistance(sliding resistance) with the inner wall of a catheter used together with the guide wire 1.
Tube rotating Speed 3- 7 RPM variable( reversible), and there are 3 quartz lifting plates on the inner wall of the tube.
Note that the initial portion of plasticization of the screw, the inside of the backflow prevention valve, and the inner wall of the nozzle tip, to which resins easily adhere, are dirty in many cases.
Electrolytic grinding technology makes the inner wall as smooth as a mirror surface to prevent heat loss, and 99.7% high vacuum rate long-term heat preservation for 12 hours.