Examples of using Substrate in English and their translations into Bengali
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
This also had no competitors, and the skins themselves not only change the substrate of the scheme, but also the objects displayed on it.
The substrate is apparently not needed for cocoons, but the substrate is considered to act as a regulator of moisture which prevents drying.
Tungsten carbide(WC) substrate is one of the optimum foundations for mining or machining tool parts coated by a layer of diamond film.
But there will be no damage to the mating surface until the bronze substrate surface is exposed.
The Zerodur substrate achieves minimal thermal distortion.
Clean with solvents such as toluene or acetone to keep the substrate surfaces completely clean and dry;
On a flatbed press, followed by a squeegee pass to bring the stencil and substrate into contact for ink transfer.
If you installed with PU, then you your substrate is ruined by glue after disposal.
The substrate material of a PCB changes according to the specific qualities- such as cost and bendability- each designer is looking for in their finished product.
surface morphology and film/substrate compositional quality" of the result.
So that on the substrate media we have prepared there will be no mix and mix with house flies and green flies.
stamping die activates the adhesive layer of the film, which directly bonds the adhesive to the substrate.
Surface preparation: For best adhesion, the substrate surface should be clean and dry prior to application.
also protect the substrate.
Non-contact, that is, when the screen is deformed with a given tension above the substrate;
Hot Dipped galvanizing substrate the product obtained by applying an organic coating to hot-dip galvanized steel sheet is hot-dip galvanized painted sheet.
Powder coatings can be described as“solid paint” which can be melted to form a continuous film over the substrate.
Paint board substrate and spray paint are environmentally friendly,
Substrate without collision with gas molecules in the space between the source and substrate. The trajectory.
Coating shall be applied on a chromium pre-treated aluminum substrate and oven baked to a dry film thickness of 30 microns minimum.