Examples of using Clamping in English and their translations into Chinese
{-}
-
Political
-
Ecclesiastic
-
Programming
The structure(see picture): This screwdriver is a two-part set of the screw clamping part and the ordinary screwdriver.
一、结构(见图):此螺丝刀是由螺钉夹持部分和普通螺丝刀两部分组。On the other hand, excessive clamping force may produce damage in structural components of the joint, such as excessive distortion or breakage.
Set-up times and cost savings, flexibility, productivity, energy efficiency and security- all that you expect from clamping solutions.
节省安装时间及成本、灵活性、生产力、能源效率及安全-这些您均可从夹持解…详细.However, at the same time, the cutting resistance will be increased, so it is necessary to consider the use of clamping rigid high tool shank.
但同时，切削阻力会变大，因此必须考虑采用夹持刚性高的刀柄。(7) Laser drilling has simple requirements for workpiece clamping, and it is easy to realize online and automation on the production line.
激光打孔对工件夹紧要求简单，易于实现在线自动生产线。
Under normal circumstances, the adsorption area should not be less than 30cm2, that is, the clamping force is not less than 450Kgf.
在正常情况下，吸附面积不应小于30cm2，即夹紧力不小于450Kgf。The clamping and loosening process of the permanent magnet fixture takes only about 1 second, thus greatly reducing the clamping time.
电永磁夹具的夹紧和松开过程仅需1秒左右，因此夹紧时间大大缩短。Secondly, the contact area between the workpiece and the clamp should be increased or the axial clamping force should be used.
还必须增加工件与夹具之间的接触面积或使用轴向夹紧力。Disadvantages: high price, poor nail holding force, connection with glue or jaw clamping process, so only some products can be used.
缺点：价格高，钉子力差，与胶水或钳口夹紧过程连接，所以只能使用一些产品。In this way, the number of times the workpiece is mounted can be reduced, and the time for handling and clamping can be effectively shortened.
以这种方式，可以减少组装工件的次数，并且可以有效地缩短操作和夹紧时间。When the women went into early labor, their infants were assigned at random to umbilical cord milking or delayed cord clamping for 60 seconds.
当这些妇女开始早产时，他们的婴儿被随机分配到脐带挤奶或延迟夹紧脐带60秒钟。Connecting devices for low-voltage circuits for household and similar purposes- Part 2.1: Particular requirements for connecting devices as separate entities with screw-type clamping units.
家庭和类似用途的低压电路用连接装置第2-1部分:作为单独实体的带螺纹式夹紧装置的连接器件用特殊要求.The laser does not exert any pressure on the material during the process, clamping or any other type of fixation is not required.
激光在加工过程中不会对材料施加任何压力，不需要夹紧或任何其他类型的固定。Meanwhile, with the FDA busy clamping down e-cigarettes, the IQOS approval is very likely to be delayed.
与此同时，由于FDA忙于取缔电子烟，IQOS的批准很可能被推迟。Clamping force should be identified as per 4700- 6200t/m2, depending on the specific plastic grade and product requirements.
锁模力按照4700-6200t/m2来确定，具体需根据塑料等级和制品要求而定。The automatic filling is mainly done by the nozzle, the baffle rod and the clamping rod, and does not have the forming correction function.
Delaying umbilical cord clamping to ensure babies receive important nutrients they need after birth;
Clamping allows the algorithm to change the weight of the true ground labeled data to some degree.
Clamping允许算法在一定程度上改变真实标签化数据的权重。Today, we continue to use our expertise to provide manufacturers with robust clamping solutions developed specifically to fit their ever evolving applications.
今天，我们继续利用我们的专业知识，为制造商提供专为满足其不断发展的应用而打造的可靠的夹钳解决方案。Injection molding machines are also known as injection presses and consist of two main parts, a clamping unit and an injection unit.
注塑机，也称为注射机，是由两个主要部分组成，一个注射单元和一个夹紧单元。
