Examples of using Sensor must in English and their translations into French
{-}
-
Colloquial
-
Official
Set this jumper to select the number of times the sensor must be triggered(1,
To accomplish the monitoring, the sensor must be equipped with an extra conductor.
Once installed on site, each sensor must be calibrated in a free space to reflect the magnetic field corresponding to the non-occupancy of the space.
If the clock is to be connected to a sensor, the sensor must be activated before the clock.
To ensure a lasting function, the sensor must be made of the right materials,
Immerse the wand in a container containing at least 250 cc of milk the sensor must be at least 3 cm below the water level.
The sensor must be touching your skin,
For correct usage of the SmartSense, the sensor must have an extra conductor.
The sensor must also be sufficiently sensitive
Finally, the sensor must be suitable for mass production at a reduced cost.
The proximity sensor must be positioned near the fluid coupling outer impeller
The sensor must be installed in a socket
The measured object, the holder for the measured object, and the sensor must be clean before you start measuring.
The settings of this component may not be changed in any case, because otherwise, the sensor must be recalibrated.
Below Ta -10 C, sensor must be turned on at Ta> -10 C.
The valve and the sensor must be installed carefully to avoid damaging the capillary tube.
Important: before calibrating the AStrO, the sensor must be installed correctly(see installation, page 24),
The Sensor must be positioned at a location in the watering area which is exposed to the same climatic conditions as the plants(sun,
the tube extension of the sensor must have a diameter of 21.3 mm(0.84 in): ARV 52 cannot
the two-part sensor must be turned 180 against itself(Fig. 5) Plug the sensor
