Examples of using Preheating in English and their translations into Japanese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
Can be used for various types of heat processes that require clean heat application, and preheating for semiconductors.
The instrument preheating interface directly displays the parameters of the instrument operating conditions, the user can determine whether the instrument can operate normally according to this parameter.
The preformed part can be adjusted by the length of the reflector of the lamp tube and the preheating zone, and the permanent temperature of the preheater is preheated by the automatic constant temperature device.
Derusting grade level Sa2 1/2(GB/T8923, no chloride attached on steel surface. Preheating: temperature should be controlled in 220-245℃.).
Five heating spots: double preheating box, heating table with tools, wax residue recycling hot plate, dissolving wax box and wax outflow tube.
Thus, functions are maintained like preheating or prenfriar, the carrier through the smartphone while it is charging without penalizing one iota the range of autonomy or control loadings also remotely.
When immersing into a cleaning fluid immediately after soldering, the same as for the difference in the preheating temperature, provide an air cooling process so that the difference in the cooling temperature satisfies the ΔT in Table 1.
All the surfaces of every rollers have been grinded with high accuracy and chromed plated to less the resistance of paper preheating, long service of using life.
There are five heating points: big wax box, left preheating box, right preheating box, tool heating table and wax recovering hot plate.
Applications: JIS G3461 steel tube can be widely used as boiler water tube, smoke tube, superheater tube, air preheating tube, accessories for transferring heat inside and outside the pipe.
In order to prevent the unevenness of thermal field temperature fluctuation by fresh air, there is a design of the fresh air preheating system and the ceramic tube homogenization system, which can greatly improve the temperature uniformity.
It is mainly used for surface treatment(namely preheating, rust removal, paint spraying and drying) of steel plate and various structural sections, as well as for cleaning and strengthening of metal structural parts.
The cold start performance is good: equipped with the inlet and electric preheating device and 6.6kW high power starter, which improves the engine cold start performance.
With the introduction of the 80KW induction forging heater for steel preheating, this simple and cost-effective heating process can be applied in the following applications to deliver fast and consistent heat.
Stability: after preheating, zero excursion and measurement distance excursion in 4 hours should not be over the allowance value of sample value error.
Salt liquid preheating Equilibrium between salt-liquid temperature and the temperature in the box(without the influence of too low salt-liquid temperature on the test temperature).
Description Characterizing excellent corrosion resistance, high temperature strength and outstanding physical mechanical performance, tantalum crucible is suitable for reboiling, preheating and condensing of nitric acid combinations with any other chemicals like aqua regia.
Litecoin completed production cuts, Bitcoin cut production preheating, Bitcoin cash production cuts ahead, and there is a possible ETH production cut.
Fast on/ off, Projector is turned on does not require preheating can quickly achieve hundred percent brightness, but after the power is turned off without waiting for cooling.
Including rotary forming machine, vacuum auto drain system, auto cleaning system for the forming mold, preheating system and auto control cabinet.