SURFACE ROUGHNESS in Slovenian translation

• površinske hrapavosti
• hrapavost površine
• hrapavosti
• površinska hrapavost
• površine hrapavosti
• površinsko hrapavost
• hrapavosti površin
• hrapavost

Examples of using Surface roughness in English and their translations into Slovenian

shape, surface roughness and sorting tolerance of steel balls.
obliko, površinsko hrapavost in toleranco za sortiranje jeklenih kroglic.

Gear processing base section error and tooth profile error is too large, the tooth side gap is too large, the surface roughness is too large and so on.
Napaka baznega odseka obdelave orodja in napaka zobnega profila sta prevelika, zobna stran je prevelika, površinska hrapavost je prevelika in tako naprej.

The Graph EPB3M-6 shows that the bearing could achieve its best performance when the counter shaft surface roughness is around Ra0.6.
Graf EPB3M-6 kaže, da ležaja doseže najboljši nastop, ko števec gredi hrapavosti je okoli Ra0.6.

highest quality at the cutting edge and low surface roughness in the kerf.
najvišjo kakovost na rezalnem robu in nizko površinsko hrapavost v zarezi.

From Graph EPB2-6, it shows the friction factor of CSB-EPB2 is variable against different shaft surface roughness.
Iz grafa EPB2-6, razvidno, da je trenje faktor CSB-EPB2 je spremenljivka proti hrapavosti površin različnih gredi.

When used with hard installation materials the borehole must have a surface roughness of RZ= 10- 30 µm.
Pri vgradnji v trde materiale mora imeti izvrtina hrapavost Rz= 10- 30 µm.

the form-position tolerance and the surface roughness.
toleranca položaja v obliki in površinska hrapavost.

With this technology, a surface roughness of Ra0.008μm can be achieved, which is the highest among various polishing methods.
Uporaba te tehnologije lahko doseže Ra0.008μm površine hrapavosti, je najvišja od različnih načinov poliranja.

The enclosure is made from stainless steel with a brushed grain size of 400, producing a surface roughness Ra of less than 0.8 μm.
Ohišje je izdelano iz nerjavnega jekla z granulacijo 400 ter ima površinsko hrapavost Ra manj kot 0,8 μm.

Using this technology can achieve Ra0.008μm surface roughness, is the highest of a variety of polishing methods.
Uporaba te tehnologije lahko doseže Ra0.008μm površine hrapavosti, je najvišja od različnih načinov poliranja.

The use of this technology can achieve a surface roughness of Ra0.008μm, which is the highest among various polishing methods.
Uporaba te tehnologije lahko doseže Ra0.008μm površine hrapavosti, je najvišja od različnih načinov poliranja.

achieve excellent surface roughness.
visoke kakovosti hrapavosti površine.

Used to improve the asphalt surface roughness and friction coefficient,
Uporablja se za izboljšanje površinske hrapavosti in trenja koeficient asfalt,

depending on the surface roughness.
je odvisen od hrapavosti površine.

depending on the surface roughness.
je odvisen od hrapavosti površine.

the emergence promyatyh plots surface roughness violation of the topcoat,
pojav promyatyh parcele površinske hrapavosti kršitev pokrivnega premaza,

as far as possible to make dimensional accuracy grade and surface roughness grade requirements lower, and conducive to product interchange,
bi zahteve dimenzijske ravni natančnosti in ravni hrapavost površine nižja, in je ugodno za izmenjavo izdelkov,

clean marked line, Recovery and increase the airport runway surface roughness, Increase the friction coefficient of the runway etc.
povečanje letališča vzletno-pristajalne steze hrapavosti, povečanje koeficienta trenja vzletno-pristajalne steze itd.

processed by CNC machines to ensure a surface roughness lower than 0.8.
ga pridobivajo iz Švedske in ga obdelujejo CNC stroji, da se zagotovi hrapavost površine pod 0,8.

try to make the dimensional accuracy level and surface roughness level requirements lower, and is conducive to product interchange,
bi zahteve dimenzijske ravni natančnosti in ravni hrapavost površine nižja, in je ugodno za izmenjavo izdelkov, zmanjševanje odpadkov,