英語 での Flow rates の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
Increased blood flow rates in the arteries of the eye after a course of the drug Phezam indicates an improvement in blood supply to the eye membranes.
The difference in the incoming and outgoing mass flow rates represents the net rate of change of air mass with respect to time.
Mid-expiratory flow rates also showed a small improvement with caffeine and this was sustained up to four hours.
The table above shows typical power requirements for various flow rates.
The 1" tank heads is fully ported to provide maximum flow rates. It's incorporated a.
Configurable flow rates& interchangeable sensors for 0.5 µm- 600 µm particle size detection.
Spray droplets are much bigger, flow rates are much higher, and shower times are much shorter than the atomized mist in the Salt Fog Function.
Spray droplets are much bigger, flow rates are much higher, and shower times are much shorter than the atomized solution mist in the Fog Function.
Ensure that there are sufficient effective head drops and flow rates in medium and small scale rivers and agricultural canals.
Pressure capabilities up to 7 Bar(100 psi) provide high flow rates and allow for faster processes.
Backflow channels: The patented backflow channels were also improved and optimized for maximum flow rates.
Sluice gates are commonly used to control water levels and flow rates in rivers and canals.
These Zero Air generators use catalytic combustion to produce flow rates of up to 40 liters per minute.
The asymmetric design of the channel plates enables the fluids to have different flow rates.
Sluice gates commonly control water levels and flow rates in rivers and canals.
Long field life with large variation of inlet pressures which subsequently require a wide range of CV's to maintain flow rates.
The MINUCON®, with its excellent control of microscopic flow rates, makes it is easy to notice a leak of colorless and odorless gas in gas mixing processes.
The Integrated Flow Controller NT6520 is designed for point-of-use blending and dispense applications requiring medium to high flow rates(2.5- 40 L/min).
Accuracy is extremely important, and pressures, temperatures, and flow rates must all be calibrated on a regular basis to ensure that the machine provides the correct therapy.