Examples of using Threaded in English and their translations into Malay
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
(3) Splice two pieces of threaded rebar with coupler.
They often have solvent welded socket ends or female threaded ends.
Threaded length of the screw shall be limited in a way the unthreaded part shall reach the edge of assembled parts tighten together by using plain washers.
curved, threaded, drilled, sheared,
Chuck adapt plane threaded structure through the gear,
Bolted bonnet with spiral- wound gasket, threaded and seal welded bonnet
Forged brass elbow cw617n brass female threaded elbow wall plate brass Compression Fitting,
Female threaded ball valves/Threaded Ball Valve are suitable for use on pipelines of medium
(2) There are two kinds of threaded, cartridge valves sealing materials,
On the side right the mount point we have a hole threaded a quarter inch,
Thread tapes are used to seal, lubricate, and prevent seizure on threaded bolts, studs, and fittings.
Cap supplier Derbo Steel can provide BW end Cap and Threaded Cap in kinds of materials such as Carbon Steel,
Hanry Vickers, in 1936, invented pilot operated pressure valves as threaded connection series hydraulic control components.
Threaded mandrel prewinders are also best recommended for successful installation of screw locking inserts and free running inserts having a fine thread pitch.
Each knuckle racquet is basically a round frame about 18 inches in diameter across which strings are threaded in a cross-hatched pattern similarly to a tennis or racquetball racquet.
Forged brass male threaded elbow ms58 brass elbow fitting brass Compression Fitting,
is designed to connect threaded rebar with diameter from 12mm-50mm.
Forged brass female threaded elbow c3771 brass elbow fitting brass Compression Fitting, connecting copper pipes on one end and the other end connecting male threaded. .
they can be started and threaded by hand for the full length of the bolt thread. .
This type of valve has a pointer indicator threaded onto the upper end of the stem to indicate the position of the gate.