Examples of using Process control system in English and their translations into Spanish
{-}
-
Official
-
Colloquial
Test key on SU 501 Ex- by monitoring the switching sequence of the test process You can carry out the function test with the outputted current values also directly via a safety PLC or a process control system.
Short interruption of the supply line to the sensor You can carry out the function test with the outputted current values also directly via a safety PLC or a process control system.
connected via standard Ethernet to the process control system from Zone 1/21 into the safe area.
The trainer can be used to demonstrate how the controller parameters can be configured from the process control system(adaptive control), and how the process data can be uploaded from the controllers to the process control system and visualised.
BMA Automation implemented a process control system there in 2015.
also real-time diagnostics information as well as characteristic sensor data to a process control system.
traceability as well as enhanced process reliability through real-time diagnostics information in the process control system.
remote I/Os from Turck are working on almost every process control system at the Brunsbüttel plant to the full satisfaction of its operators.
A continuous fl ow measurement of the dosing chemical with a direct data connection to your process control system guarantees you maximum safety;
the MIK continuously communicates the measured values to your process control system, so that it allows immediate response to the latest process conditions.
an elaborate industrial process control system.
SKF combined this axial force load signal with measurement data on the operating conditions directly from the rolling mill's process control system as well as with values on the axial bearing shift determined using SKF sensors.
as well as interfaces to the process control system.
a photoelectronic diameter measurement system and an elaborate industrial process control system.
a complex steam power plant with a process control system and an output power of 20kW ET 805.
OPTIBAT energy is a high-end product that runs in on-line connection with the Process Control System and reacts to any change in the process proposing
To safeguard product testing and process control system stabilization, various fine tuning procedures are applied: wiring harness bench tests,
Time to Maintenance can be output to the process control system via two 4 to 20 mA analog output signals.
good processing practices, and a process control system.
PivotWare by Desoutter: process control systems for assembly operations| Desoutter Industrial Tools.