Examples of using Cross-sections in English and their translations into Swedish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
-
Political
In both animals, anatomical cross-sections showed that the cancerous kidneys were bigger than the healthy kidneys.
load-bearing structure are the tunnel cross-sections and their lengths.
Standard engineering formulae used for calculating cross-sections of elastic materials must therefore be used with some caution.
Range of applications also for large cross-sections: square crimping 0.08 to 10.0+ 16.0 mm²- Front loading: very helpful under difficult working conditions in confined areas.
The second round, in cross-sections(see below), requires new participants to comment on,
Blades with recess for easier cutting of larger cross-sections thanks to better leverage close to the fulcrum.
The large clamping capacity(up to 2.5mm² wire cross-sections) is particularly beneficial for long bus cables or high currents because of the low voltage drop.
On cross-sections, the storage cells can be seen as narrow tangential bands, which are particularly evident in the heartwood of the Moabi.
install three-phase 66 kV copper cables with two cross-sections.
The fluid flow in the vertical 2-D cross-sections of a rock fracture was also simulated by solving both Navier-Stokes(NS)
The printer reads the cross-section information in the file, prints the cross sections layer by layer in liquid, powder, or sheet-like material, and then bonds the cross-sections of the layers in various ways to create an entity.
In accordance with Scheme calculate lengthdifferent cable cross-sections, the number of switches,
On the first step of the algorithm on determination of mesh cross-section with each cell, there are cases when cross-sections of the mesh with the cell do not exist the cell is either inside or outside.
Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled"cold-reduced", unworked, straight and of uniform wall-thickness, for use solely in the manufacture of tubes and pipes withother cross-sections and wall-thicknesses excl.
it is extended by means of editing the obtained set of cross-sections removing, adding the section with a mandatory check for the validity of such an operation.
profiles and cross-sections, contours, facade drawings,
creating and updating cross-sections in seconds, creating
A cross-section of the whole camp.
In cross-section has a harpoon hook shape.
Its cross-section and cross-section of the phase conductor,