Examples of using Correct position in English and their translations into Czech
{-}
-
Colloquial
-
Official
Check the correct position of the seal around the front cover.
The correct position of the electric cable fitting(8)
Make sure that the O-ring(10) is in the correct position during installation.
We need only manoeuvre the MALP into the correct position.
Fig. 5.10: Hanging the bolt on the holder Fig. 5.11: Correct position of the mounting plate.
I'm not sure this is the correct position.
When fi tting a new rubber collar(3.1), make sure it is in the correct position.
observing the correct position of the spring retention.
Excellent tool for learning the correct position on the foot.
Fig. 2.7: Hanging the bolt on the holder Fig. 2.8: Correct position of the mounting plate.
This is the correct position.
eventually take the correct position.
Therefore, you must find the correct position.
the nose bridge and push it downwards into the correct position.
Let's see… This is the correct position.
Check the state and correct position of the ignition and flame-sensing electrodes;
Correct position of sensor and magnet.
rotate them until you get the correct position.
Whilst in the correct position.
Now turn the protective cover through approx. 30 degrees until it reaches the correct position.