Examples of using Red led in English and their translations into Czech
{-}
-
Colloquial
-
Official
In fail-safe case, the red LED on the receiver.
Place food inside the product only when the red LED(if provided) has switched off.
Press the‘punch button' to cancel the red LED.
The Parent Unit charge level is indicated by a red LED 4.
What about the red lead?
They will break you yet. They can't tolerate a Red leading the pack.
Red LED shows the device state- Light indicates alarm state(some sensors
Red LED indicates device state: continuously on means Alarm(DI outside of the safe range), flashing means TCP
When the Battery Pack is fully charged the red LED will be OFF and the green LED will illuminate.
Red LED If the red LED lights up,
processor activity signals the red LED RUN.
Also the red LED(if provided) will switch on because the temperature inside the appliance is not yet sufficiently low for food storage.
If you press【Call History】while its red LED is flashing(indicating there are unviewed missed calls), it will enter the“Missed calls” list directly.
A red LED light indicates that the machine is on
The high-brightness 4-element red LED provides a strong
After switching on, boiler does not operate and red LED comes on after about 30 sec.
Tap to set delay time for active effect(s) only; red LED above will flash in time accordingly.
The front panel is completely decluttered, Stand-by push button with red LED indicator are only elements to be found there.
press the bind button on the receiver for 3 seconds until the red LED turns off.
It will be ended when the red LED goes out and the green LED lights up.