Examples of using Required temperature in English and their translations into Czech
{-}
-
Colloquial
-
Official
Required Temperature Correction The pre-set required temperatures in each temperature mode can be changed within±3 C directly from the HMI-SG controller.
and set required temperature(160 C- 280 C) with screwdriver.
20 minutes, until the required temperature is reached.
When the room has reached the required temperature, turn the thermostat slowly anticlockwise until the indicator light goes out(or until you hear a"click") and no further.
The required temperature can be adjusted over the range 50ºC- 450ºC(550 C) via 2 buttons Up/Down.
also set the required temperature by turning regulator A2.
the required temperature mode, set any fan speed output stage and the required temperature correction.
When the room has reached the required temperature, slowly turn the thermostat until the indicator light goes off(or to the position marked by a click)
their parts is done by nitrogen that is heated up to the required temperature.
The device is fitted with a powerful heating element, so it reaches the required temperature within 20 seconds
water will cool down to the required temperature that will be kept at the preset level during 30 minutes.
However, the appliance is only started when the required temperature(pic. K/12)
Once you set the required temperature, press the mouthpiece again,
a heater for after-heating to the required temperature.
The red- control light(6) glows and you can hear the sound signal when the required temperature is reached.
Use the Plus(T5) button to increase the required temperature or use the Minus(T4) button to decrease the required temperature.
less time depending on the setting then restarts it assuring the required temperature.
when you have internet connection, you can simply switch the heating on or off, or set up a required temperature in each room with your phone.
Boiler shutdown when the required temperature is reached The boiler controller can temporarily stop the requested space heating demand.
For proper selection of cooling kit are essential parameters are internal volume(cubic meters) and required temperature of cooled room.