Examples of using Second cut in English and their translations into French
{-}
-
Official
-
Colloquial
then lower the mower housing for the second cut.
Underbuck the branch 1/3 through for your first cut(A), your second cut(B) should overbuck to drop the branch off.
The second cut is at least 0.75 mm deep
first use a higher height setting and then finish with a second cut to the desired length.
A first cut at maximum cutting height and low drive speed followed by a second cut at final height insure a good finish photo.40 a and diagram 40 b page 52.
the past 50 years. The second cut across the entire country and caused considerable damage to the Cuban economy.
refined surface roughness of the second cut by TMP II Control,
The cutting blade is designed with a second cutting edge.
Repeat the above procedure for the second cutting line on the lower section of the spool.
Repeat the above procedure for the second cutting line on the lower section of the spool.
continue the procedure with the second cutting mark.
allowing machine extensions to meet future cutting requirements by adding new modules, a second cutting head or a new bridge with more heads.
Cut the second apple, fan-like.
If you make this cut second, tree can pinch chain
A second price cut the same year discounted the subscription rate to less than $30.
The Princess cut is the second most popular cut shape for Diamonds next to a Round brilliant.
The construction of the mouthpiece is such that the lower end is cut diagonally to accommodate the lower lip and the second diagonal cut is make for the blowing edge.
Second cut hay, alfalfa 85 percent or more 123.
Second cut hay, legume and grass mixture.
Then, make the second cut from top to bottom opposite to the first cut. .