Examples of using Wall surface in English and their translations into French
{-}
-
Colloquial
-
Official
For wall surface measurements, press the function-mode button 4 until the indicator for wall surface measurement appears on the display.
Raises the wall surface temperature by up to 3 C, depending on the construction of the wall. .
Hold the Reverse Osmosis assembly up to the wall surface where you will install it.
Pull the outer casing forward approximately 1 inch away from wall surface.
pipes in the same manner that studs are detected depending on their location to the wall surface.
breaking up a large plain wall surface.
do not block the space between the rear surface of the plasma display and the wall surface.
This will ensure an airtight/waterproof connection between the fan and the wall surface.
Self-piloted bit follows every trimmer movement to create exact reproduction of wall surface in one pass!
Metal safety sling included, to avoid drops in case of accidental detachment from the wall surface.
pipes in the same manner that studs are detected depending on their location to the wall surface.
sides of the camera at the wall surface.
gently tap until the flange on the anchor is against the wall surface.
In addition, an outlet portion of treated water is provided on the other upper wall surface, the wall surface being located downstream.
The wall surface measurement is used to determine the sum of several individual surfaces with a common height.
Make sure that the wall surface is as even as possible so that the housing does
The wall surface measurement is used to determine the sum of several individual surfaces with a common height.
Top flange must extend out from finished wall surface approximately 1/8 inch(3.2 mm)
Hold the Reverse Osmosis assembly up to the wall surface where you wish to install it.
For wall surface measurements, press the function-mode button 4 until the indicator for wall surface measurement appears on the display.