Examples of using A flow in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Solenoid valve with orifice of 12 mm and a flow capacity Qn5100L/min.
In the case of a flow operation, a stand-pipe for the discharge of the gas should be installed and a gas pump should be applied.
A flow cell or flow reactor is an accessory, which makes it possible to process material, e.g.
For the commercial production of cell extracts, continuous ultrasonic systems with a flow cell reactor are most suitable.
The bitumen pump feeding the line is an Ebsray T200M with a flow rate of 0.2614 ltr/rev.
Preliminary tests should be conducted in batch mode, while further processing trials require a flow cell for pressurized recirculation or in-line testing.
Tungsten carbide nozzle is a device designed to control the direction or characteristics of a flow(especially to increase velocity) as it exits(or enters) an enclosed chamber or pipe via an orifice.
Activating a flow in SalesForce flow builder can be done in the setup process automation menu, where it is necessary to create a new view to be able to add a flow in the view using the flow builder, where it will also be possible to run the flows….
A flow diagram of the synthetic process(es) should be provided that includes molecular formulas, weights, yield ranges, chemical structures of starting materials, intermediates, reagents and API reflecting stereochemistry, and identifies operating conditions and solvents.
The pressure control valve is called a pressure control valve, the flow control valve is called a flow control valve, and the directional control valve is called to control the on, off and flow directions.
When a flow meter is near the source of an electric motor, a frequency converter, or a strong current, the solution is to provide an earthed or filtered capacitance to the meter.
The advantages of an ultrasonic in-line process using a flow cell reactor are the more uniform processing of the medium, the application of pressure, which is an important parameter, and the convenient, efficient sonication of large volumes.
Accessories such as Hielscher's unique MultiPhaseCavitator, a flow cell insert that injects the second phase via cannulas directly into the cavitational hot-spot(see pic. left), help to setup an optimal ultrasonic emulsification system.
If you want to measure mass flow, you need a temperature sensor(such as a thermal resistor RTD), a pressure sensor, and a flow totalizer to achieve temperature and Pressure compensation measurement.
The cylinder has a piston and four cavities distributed from top to bottom: the power system consists of a storage device, a filter, an oil pump, a relief valve and an oil pool, and an oil pump and a flow valve and a pool.
A flow through receiver condition will exist when the pump is turned off.
Thanks to this, a flow connected with the Asian sign system and calligraphy was created.
Me and Kajo had a flow when we were working on the project.
I would need a flow chart to explain all the ways in which.