Примери коришћења Outer ring на Енглеском и њихови преводи на Српски
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Latin
-
Cyrillic
a ring of bluestone rings was raised inside the horseshoe, and another in between it and the outer ring of sarsen stones.
The outer ring or the inner ring,
Then, apply heat to the outer ring using a kitchen torch for short 30-second bursts
it consists of one outer ring that had a large spherical groove raceway,
The outer ring or inner ring,
as traffic flows westbound whereas the"outer ring" is designated as the Périphérique Est("Eastern Ring")
the general clearance with more than the outer ring with the amount of interference,
West Outer Ring Road, Anqiu city,
So what could blow a 16 foot hole in the outer ring of the Pentagon, smash through 9 feet of steel reinforced concrete and leave another 16 foot hole?
easily installation and other outer ring for double integral,
A four-point contact ball bearing is composed of one outer ring with“peach shape”section raceway groove,
then people actually live on the outer ring, because there is less traffic, less noise,
the Czech Republic in the outer ring of EU countries that object to the pooling of sovereignty required by the euro.
The inner and outer rings are not in the same center of rotation, causing disagreement.
Inner and outer rings are not in the same center of rotation, resulting in different heart.
Two additional rings were discovered in 1986 in images taken by the Voyager 2, and two outer rings were found in 2003- 2005 by the Hubble Space Telescope.
Two additional rings were discovered in 1986 in images taken by the Voyager 2 spacecraft, two outer rings were found in 2003- 2005 in Hubble Space Telescope photos.
Scientists found two more rings in 1986 in images from the Voyager 2 spacecraft and two outer rings in 2003- 2005 in images from the Hubble Space Telescope.
Two additional rings were discovered in 1986 in images taken by the Voyager 2 spacecraft, and two outer rings were found in 2003- 2005 in Hubble Space Telescope photos.
The size of the inner and outer rings of the cross roller bearing is minimally miniaturized,