Examples of using Microstructure in English and their translations into Korean
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
The fine and dense microstructure increase the strength of material and improves the anti-ageing property.
Rd generation high range water reducing superplasticizer, based on synthetic polycarboxylate copolymer which has comb-like microstructure.
Metal Forge can remove the metal smelting process of as-cast loose defects, optimizing the microstructure, at the same time keeping the intact metal flow.
Grades 1 and 6 shall be heat treated to control their microstructure.
A lot of factors such as microstructure, impurity contents in the tungsten, other alloying elements
Research repression affect the quality of the pyrometer compacts green density and microstructure of.
A fiber Bragg grating is a microstructure(typically a few millimeters long) created by modifying a standard single-mode telecom fiber, germanium-doped, with a UV laser.
hardness and microstructure of the gradient materials were investigated.
The density of the sintered compacts was measured using the Archimedes method, the microstructure of sintered body was observed by scanning electron micrascope(SEM).
Excellent thermal conductivity properties of copper, tungsten copper alloy(composition generally ranges WCu7~ WCu50) uniform microstructure, high temperature,
you should pay much attention to its high purity, maximum density and homogeneous microstructure.
W:(2016): Microstructure, mechanical properties and fracture behavior of 6061 aluminium alloy-based nanocomposite castings fabricated by ultrasonic processing.
The pictures below show the microstructure in cement paste after 5hrs of hydration.
ASMT A333 Grade 1 seamless and welded pipes shall be treated to control their microstructure.
Make tungsten copper alloy microstructure uniform, high temperature, high strength,
Decide rapidly what to do By combining tools to analyze the microstructure composition of the sample you have all the information within one second to make the right decisions.
The sleeve is a white iron alloyed primarily with Cr and Mo. The microstructure consists of a discontinuous network of hard eutectic iron and chrome carbides embeded in a termpered mixed matrix.
In contrast, the WCu microstructure manufactured by traditional infiltration technology is characterized by copper pools and very large tungsten grains, which results in
bending strength and microstructure of W-Cu/ AlN composites were measured and observed after hot pressing sintering, which can further study the effect of addition of AlN powder on WCu composite material properties.
In addition to conventional macroeconomic performance requirements, but also requires the porosity, microstructure properties, it should take a special process,