Examples of using Microstructure in English and their translations into Croatian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Studies have shown that the plastic deformation of metal materials is accompanied by changes in microstructure, mainly grain growth,
The total deformation degree determines the microstructure and properties of the sheet after rolling,
as a result of the microstructure that is obtained in the casting after heat treatment ausferrite.
dynamic recrystallization microstructure evolution of Ti-5553 alloy under this hot deformation condition will occur,
It is observed that the original beta grain boundary is very obvious in the microstructure obtained by hot deformation with a deformation rate of 95%,
The total deformation degree determines the microstructure and properties of the sheet after rolling,
structural parameters is important for a better understanding of changes in the chemical functionality and microstructure of various materials
Managerial inspection, the weld microstructure is a+b, the microstructure is columnar crystal+ equiaxed crystal, a small amount of lath martensite appears, the grain size is close to the matrix, the heat affected zone is narrow, and the microstructure and characteristics are relatively ideal.
The prepared tubular 铌 target has good microstructure and the grain along the wall thickness direction of the target Uniform,
the forging heating temperature, the content of primary a isoaxes in the microstructure of duplex titanium alloys decreases significantly,
as a result of the microstructure that is obtained in the casting after heat treatment(ausferrite).
the dendrite microstructure change organization**,
and some have for the microstructure, mechanical properties,
resulting in the primary a isoaxes in the microstructure of the titanium alloy after heating forging.
when the annealing temperature is low(720~ 820) C, while the microstructure of some changes, but still with a rod or equiaxed alpha+ beta microstructure, grain size
The prepared tubular 铌 target has good microstructure and the grain along the wall thickness direction of the target Uniform,
the content of primary a equiaxion in the microstructure of duplex titanium alloy is significantly reduced,
the purpose that in control the microstructure, such as grain size
and some have for the microstructure, mechanical properties,
and the defects of microstructure can be eliminated, so that the microstructure and mechanical properties of steel can be improved.