Examples of using Microstructure in English and their translations into Norwegian
{-}
- 
                        Colloquial
                    
 - 
                        Ecclesiastic
                    
 - 
                        Ecclesiastic
                    
 - 
                        Computer
                    
 
The high-temperature etched microstructure is ideal for deposition of cells.
The microstructure composition of the joint created using FSSW.
The microstructure changed from the ideal equiaxed structure to the poorer Wei.
The properties have two kinds of microstructure characteristics, corrosion resistance,
A key success factor is microstructure control and the mastering of particle sizes.
The annealing temperature affect the microstructure and properties of the finished tube,
Advanced scanning electron microscopy can provide a fundamental understanding of microstructure development during the processing and fabrication of aluminium alloys.
The cooling rate has little effect on the microstructure and properties of such alloys,
The microstructure is stable,
Changes in the microstructure and comparative examples have an important impact on the material's strong plasticity,
The microstructure of high strength
After heat treatment, the low-magnification structure is a fuzzy crystal structure and the microstructure is The equiaxed structure is the ideal equiaxed structure of the a+ β dual-phase titanium alloy.
The microstructure of Dual-phase steel consists of a Ferritic matrix containing a rigid second phase Martensite.
With the increasing of annealing temperature from 820 DEG C, the microstructure of the plate changed obviously at low temperature….
the primary a equiaxed content in the microstructure decreased sharply, and the a lath content increased correspondingly.
The welded tube shall be sufficiently cold worked to final size in order to transform the cast weld microstructure into a typical equiaxed microstructure in the weld upon subsequent heat treatment.
Different microstructure can be obtained by cooling down at different rates,
However, incorrect forging processes often cause titanium alloy products to have some undesirable microstructure and metallurgical defects, thereby deteriorating their mechanical properties.
The microstructure obtained by stress relief annealing
The microstructure data showed that there was a fusion zone with fine grain