Examples of using Breakage in English and their translations into Bengali
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
The machine has the advantages of high removal rate and low breakage, which would cut down the harvest time and save labor cost at the same time.
Frequency display breakage metal foreign bodies in the large
If any breakage or defect products were found,
quality of sewing thread, and it is also the key factor that affects the thread breakage.
Give up the traditional roller filling way, adopt the unique feed way to avoid the tube stuck or breakage.
AQUATEC MK-600 dive mask carries a lifetime warranty against frame and lens breakage.
impurity and crystal breakage in discharged cake, can perform feeding,
Our bubble plate further diffuses the bubbles and reduces turbulence of the water entering the conically shaped riser tube which helps prevent premature bubble breakage of the nutrient rich bubbles.
from the fake and cope poor quality, so that the lace wig can be wire at least 3 years without breakage.
VCI crepe paper can effectively avoid the breakage of stretch film at the edge of coil,
can prevent the boom from falling in case of sudden power failure, accidental spring breakage or spring fatigue.
the necessary safety features, these include overload cut off, chain breakage cut off and backup safety nuts in both carriages.
glass breakage, flammability and toxic substances leakage.
virgin Bayer/GE material and 50 micro-meter UV layer, multi-wall corrugated polycarbonate sheet offers ten-year quality warranty against breakage and yellowing.
Our unique bubble plate then diffuses the bubbles and reduces turbulence of the water entering the conically shaped riser tube which helps prevent premature bubble breakage of the nutrient rich bubbles entering the riser tube.
diffuses the bubbles and reduces turbulence of the water entering the conically shaped riser tube helping to prevent premature bubble breakage of the nutrient rich bubbles entering the riser tube.
At this time, the rocker arm must be adjusted to avoid the breakage during operation, and the rocker arm adjustment method In order to run the punch slider to the top dead center position,
must properly mate the shaft, which prevents bearing from breakage because of over-loose mate.
close to the end of the plug) in a state of micro straight, or walk when the four shaking headset line repeated bending Leading to breakage(metal wire is the biggest taboo is repeated bending).
Breakage Tension: 55kN.