英語 での Maximum allowable の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
equal to 2018's maximum allowable total energy consumption(ETEC_MAX).
However, passport photo template not limited to printing function, but warns for example, when the maximum allowable brightness value for ID photos will be exceeded.
If the length definition is left out, Doctrine will create a length of the maximum allowable length for the data type specified, which may create a problem with some field types and indexing.
If the internal gas pressure exceeds a maximum allowable limit, conventional gas springs may burst and pose a safety risk for tools and operators.
If the dosage of 2.5 mg does not give a result, it is allowed to increase a single dose to 5 mg(this dosage is considered the maximum allowable for a single dose).
Despite the fact that in Copenhagen in Denmark in particular and in general, the maximum allowable rate of alcohol in the blood is 0.5 ppm(in Russia this figure is zero), traffic police are very sensitive to driving under the influence.
To achieve greater distances by operating above the maximum allowable bus capacitance, the I2C bus specification allows operating at a lower speed, using higher drive output devices, dividing the bus into segments with bus buffers, or the use of switched pullup circuits.
This Hot Metal process allows the JPX800 to hit the maximum allowable limits for energy transfer, far exceeding previous Mizuno irons. The JPX 800 Irons from Mizuno produce the maximum allowable COR limit for energy transfer in irons by combining Hot Metal Face construction, MAX COR Technology, and an exotic pocket cavity.
Using spread spectrum transmission(i.e., frequency hopping), the maximum allowable power that can be radiated in free space is +36 dBM(without using spread spectrum transmission, the maximum allowable power in free space is- 1 dBM).
To meet these requirements, the US Army Corps of Engineers, as the project leader, stipulated a maximum allowable underwater overpressure of 70 psi(4.83 bars) at a distance of 140 ft(42.7 meters) from the closest blast hole.
If you wish to connect using Copper stubs, these will be supplied as adapters to the Stainless steel tubes sized at 2-1/8″ OD and 1-1/8″ OD respectively and rated accordingly at 725 psi(50 bar) maximum allowable working pressure which would be referred to as the Model LPA-925-CU.
Maximum allowable casing temperature.
Maximum allowable speed 1500rpm.
Maximum allowable power 23.9kw.
Maximum allowable torque 150Nm.
Maximum allowable pressure: 10bar.
Maximum allowable pressure(400kPa).
The maximum allowable power supply capacity.
Km/ h- is the maximum allowable speedometer.