Examples of using Minimum speed in English and their translations into French
{-}
-
Official
-
Colloquial
Industrial automation often require the monitoring of speed limit values such as maximum speed, minimum speed, standstill or direction of rotation.
the drilling speed is minimum speed 500/min.
With selector switch A in the V1 position, minimum speed V1 is activated.
If the refrigeration system has been overloaded, the motor cannot maintain minimum speed of approximately 1.850 RPM.
the rotating movement of the sheet must be continuous and uniform, with a minimum speed of 7 millimetres per hour measured at the inner border of the ring marking the edge of the speed recording area.
Minimum speed Terminal 6 Medium speed Grey wire(14b)
Administration may assign to vessels and convoys operating exclusively within a particular river basin a minimum speed that differs from the value prescribed in this paragraph, taking into account local conditions
Switch ON the hood at minimum speed when you start cooking and kept it running for few minutes after cooking is finished.
This mandatory corrective action specifies the minimum speed in icing conditions of 120 KIAS in the flaps UP condition,
the engine quickly returns to minimum speed.
By pressing 90 the professional electric mixer It will operate at minimum speed during 5, at maximum speed the following 25,
the engine quickly returns to minimum speed.
either take-off faster or have better stability at high speed with a peak estimated at 30 knots and a minimum speed of 6 knots for take-off.
Minimum speed as preferred configuration;
setting 1 is the minimum speed 15,000 OPM.
Vref is the minimum speed at a height of 50 feet on a normal landing and is equal to
By pressing the function 60 the professional electric mixer It will operate at minimum speed during 5, at maximum speed the following 25, again 5 at minimum speed and the last 25 at maximum speed. .
4 to 20 mA input signals Minimum speed adjustment Optional shutoff differential Rugged and sealed enclosure CSA approved 2 year limited warranty Feature specific to the VSD-1C model VSD-1C.
The questions of minimum speed limits on motorways as well as the safety implications of the activation of VDS on sensitive infrastructures such as tunnels and bridges were also raised.
The AGC Agreement prescribes 4.2 m for the distance between track centres for a design speed of more than 300 km/h nominal minimum speed, whereas the TSI Infrastructure requires 4.5 m.