Examples of using Should be connected in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
In the hinge of the two sheets of asymmetry, it should be identified which page should be connected with the fan, which page should be connected with the door and window frames, and the three sides of the shaft should be connected with the box Fixed, and the shaft connected to the side of the window should be fixed.
All sensor cable should be connected according to the correct sequence.
The water injection port should be connected to the water source.
How the shell and pipe heat exchangers should be connected?
Eject Device function decides which device(s) should be connected.
Or Contact the administrator directly from his profile(you should be connected).
then antihistamines should be connected to treatment.
(3) The power adapter of printer should be connected to a properly grounded receptacle.
The outlet of fire fighting pump should be connected with a metal hose
Your device should be connected to Internet and it is better to have a SIM card installed.
The wire to motor should be connected according to the direction of motor rotation, reverse rotated is not allowed.
The other end of the lighting cable should be connected either to a wall charger or a USB port.
Electrical equipment should be connected to the ground, wire insulation should be reliable and installed in the steel pipe laying.
Such sites should be connected to other sites by buffer zones, corridors, and nature-friendly land/water use;
SBox-32 is a SST based DP to VGA screen splitter, it should be connected after any PC with DP output port.
to this error code, the air input should be connected.
Note: Cash drawers APG: Vasario 1416 and Vasario 1616 should be connected with receipt printer only through the cable CD 102 A.
If you want to make use of the service PhotoAlert OPS, the software boxes at every register should be connected to the internet.
According to the arrow direction of rotation on the cover of the electric motor, the motor should be connected with stable wire and not reversed.