Examples of using Reference method in English and their translations into Dutch
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Computer
-
Ecclesiastic
-
Official/political
-
Programming
The reference method specified in Directive 85/203/EEC or in subsequent Community legislation will apply for nitrogen oxides.
A reference method for sampling and measurement of PM2.5 is currently being standardised by the European Committee for Standardisation CEN.
The retest determination shall be made using the iodine titration reference method specified in annex B.
Or any other method of analysis which the Commission has been shown is equivalent to the reference method.
For the determination of the water content, the calibration model uses Karl Fischer titration as reference method.
A Community reference method for detecting coliforms has therefore been established based on the abovementioned standard.
The procedure described in Annex VII shall be applied as a reference method for sensory evaluation.
Reference method referred to in Article 7(1)
For the measurement of the lead content of petrol, the reference method shall be that laid down in ISO 3830 edition approved in 1981.
It is the reference method for water determination because of its specificity,
CVE system provides a reference method for publicly-known information security vulnerabilities and exposures.
3‘Ambient air quality- Reference method for measurement of benzene concentrations.
The reference method for the measurement of lead is that described in EN 14902:2005‘Reference method for determination of Pb/Cd/As/Ni in ambient air.
For the measurement of the trace lead content of petrol the reference method shall be that laid down in ASTM D. 3237(approved edition dated 31 August 1979) using atomic absorption spectrometry.
For the measurement of the benzene content of petrol, the reference method shall be that laid down in ASTM D. 2267(edition approved in 1978)
measurement of PM10 is that described in EN 12341:1999‘Air Quality- Determination of the PM10 fraction of suspended particulate matter- Reference method and field test procedure to demonstrate reference equivalence of measurement methods. .
Reference methods and measurements for non-nuclear energy sources.
Reference methods shall be validated if they meet pre-determined precision criteria concerning the repeatability and reproducibility limit.
Community methods should therefore be laid down, which have been validated according to internationally established rules and are applied as reference methods.
accuracy with a view to their recognition as reference methods.